CONTENTS
1. Description of the Meter 4 - 8
3. Measuring the Moisture Content of a Sample
4. Cleaning the Test Cell
5. Reviewing Stored Results
6. Using ME2100 Manager Software to
Upload/Download Parameters & Data
11 - 12
12
12
13 - 15
7. Clearing the Stored Results from the Moisture Meter
8. Setting the Time and Date
9. Charging the Battery
10. Scheduled Maintenance and Calibration
15
15
15 - 16
16
Acknowledgements
Appendix A. Specifications
Appendix B. A Guide to Fuel Moisture Content and Fire Behaviour
Appendix C. Calibration Equation and Parameters
17
19
20
21 - 23
Appendix D. Establishing a Serial Connection with a PC 24 - 27
1.1 Component List
1.2 Meter Layout
1.3 Keyboard Layout
1.4 Display Layout
1.5 LAB Mode
5 - 6
7
7 - 8
8
8
6.1 Calibration Parameter and Logged Data Download from the ME2100
6.2 Modifying Parameters
6.3 Uploading Modified Parameters to the ME2100
6.4 Display Layout
13
14
15
15
Min, Max Possible Moisture Content Readings
Fuel (leaf) Condition Classification Guide
Calibration Coefficients
Fuel Moisture Meter Calibrations
21
22
23
23
D.1 Connecting the USB Serial Communications Hardware
D.2 Connecting the ME2100 to a PC using ME2100 Manager
24 - 25
26 - 27
PAGE
The contents of this document are subject to copyright © 2023Wiltronics Research Pty. Ltd, all rights reserved.
Wiltronics Research Pty Ltd 3
561 DC1V1
2.2 Turning On the Meter
2. Checking the Operation of the Meter 9 - 10
To Next Page
Loading...