WiMo PicoAPRS V4 - Settings; Device Mode

To Next Page

To Previous Page

3.2 Settings

- Device Mode

- Brightness

- Softwareupdate

- GPS Powersave

- Beep

- Units

- Device Info

Device mode

- APRS

- RX iGate

- GPS

- FM-Voice

- FM + WIFI APRS

- Fill in Digi

- TNC

*USB-C

*TCP

*Bluetooth

Available devicemodes

- APRS: Pure APRS transmission and reception via VHF resp. LoRA®

- RX iGate: Forwards received APRS packets to the APRS IS network. This

requires an internet connection via WIFI.

- GPS: Forwards the data from the GPS receiver via USB or Bluetooth.

- FM-Voice: Pure FM radiotelephone operation via VHF.

- FM + WIFI APRS: FM radiotelephone operation via VHF and APRS usage via

the WIFI internet connection.

- Fill in Digi: PicoAPRS retransmits APRS packets received over VHF if they

were received with the path "WIDE1-1, ...."