EasyManua.ls Logo

WiMo PicoAPRS V4 - TX Interval; Mycall

WiMo PicoAPRS V4
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX Interval
Specify the intervals at which position reports
should be sent. Please note that the interval set
here only applies if your position has changed by at
least 50* or 100 meters!
*50 meters only with very high GPS accuracy and slow movement
speed.
MyCall
Here you set your own call sign. This is the most important setting you have to make! A
valid call sign is at least 4 digits long.
It is used to send position reports and receive personal text messages.
If previously set, the currently set call sign is
displayed here.
To delete or correct the entry, press the virtual key
"<".
www.wimo.com - 34- ©Taner Schenker, 13. December 2022