26
Operations
Models with Chemical Metering System
1. Remove chemical bottle at fill port as needed using quick disconnect fitting at base of chemical bottle.
2. Flush chemical system when not in use. Empty chemical bottle and refill bottle half way with clean water. Run
machine on the 4oz / gal dilution rate to purge chemical through the system until the chemical bottle is empty.
Set dilution rate for next cleaning.
Chemical Metering Controls
1. CHEMICAL METERING SELECTION SWITCH (OPTIONAL)
Three position switch controls dilution rates of 1, 2, and 4 oz/gal. Chemical metering is activated from the main
c o n t r o l p a n e l w i t h t h e r o t a r y s w i t c h , p o s i t i o n s m a r k e d w i t h :
86398220 Operators Manual - Chariot-2 iScrub 20
To Next Page
Loading...
