18
Operations
Scrub Controls
1. FUNCTION MODE SWITCH
The first two positions are for transport only. See drive controls section.
Light cleaning
This mode is used for light cleaning. In this mode the machine will propel at fast speed. The
‘floating’ scrub deck and squeegee is in the down position. The water will flow. Water will auto-
matically shut off in neutral and restarts when scrubbing is resumed. The vacuum will draw the
water into the recovery tank.
Deep cleaning
This mode is used for deep cleaning. In this mode the machine will propel at a low speed. The
‘floating’ scrub deck and squeegee is in the down position. The water will flow. Water will auto-
matically shut off in neutral and restarts when scrubbing is resumed. The vacuum will draw the
water into the recovery tank.
1
LABEL WITH CHEMICAL METERING OPTION.
86398220 Operators Manual - Chariot-2 iScrub 20
To Next Page
Loading...
Need help?
General