EasyManuals Logo

Winegard ConnecT 2.0+ User Manual

Winegard ConnecT 2.0+
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Congratulations on your Winegard
®
ConnecT 2.0
+
purchase! Thank you for trusting Winegard to bring connectivity
solutions to you while on the go. This product will provide you more freedom when choosing where to adventure,
all while bringing the comforts of television and the internet securely to you and your devices.
PARTS LIST
WARNINGS:
Read this manual carefully and completely before attempting to
assemble, install or operate this product. Winegard recommends the
installation of this equipment be done by a professional technician
familiar with the vehicle in which it is installed.
Winegard recommends wiring directly to a fused panel or fused box.
However, if you are wiring to the battery, understand that batteries may
expel explosive gases when not properly ventilated, therefore, special
care and consideration is required. Consult your vehicle manufacturer for
additional information on safely installing accessories.
Save these instructions.
Do not mount closer than 12 inches from the edge of the roof or any
adjacent devices.
Do not paint any portion of the Winegard ConnecT. Painting the system
could damage the system and will void the warranty.
When first setting up the Winegard ConnecT 2.0
+
, it is recommended to
check for software updates the first time the system is connected to an
Internet signal. It is also recommended to check for updates every couple
months for fixes and added features.
The Winegard 4G LTE FreedomGO Nationwide Data Plan Service will not
work in Mexico.
At the time this manual is written, the ConnecT 2.0
+
will work with the
Winegard Data Plan, AT&T
®
and Verizon
®
Wireless*. Please consult with
your carrier to receive the correct SIM card (Mini/Standard SIM).
*Visit www.winegard.com/connect to see the updated approved cellular
providers.
Mounting
Screw (20)
WP2-600
Wall Plate
Wall Plate
Screw (2)
Cable Entry Plate
Antenna
Terminal
Insulator (4)
20’ Power Cable
Extension
INCLUDED IN WF2-95B, WF2-85B, AND WF2-35B MODELS ONLY:
WIFI On/O
Switch
TV Antenna Power
Supply w/hardware
OTHER POSSIBLE POWER SUPPLIES:
2
Disclaimer:
Although every eort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any
errors or omissions in this manual. Changes and technological advances are continuously being made in the wireless market. Information provided
in this manual was accurate at time of printing. If the ConnecT 2.0
+
antenna does not function as expected, please contact Winegard Company at
1-800-320-9992, email help@winegard.com, or visit our website at www.winegard.com/connect.
CONTENTS
Welcome ........................................................ 2
Parts List ....................................................... 2
Warnings ....................................................... 2
ConnecT 2.0
+
Installation .............................. 3
WiFi/4G Operation ......................................... 6
Operating Features ........................................ 7
Swapping the SIM ........................................ 10
All about the App .......................................... 12
Over the Air Antenna Operation ................... 13
Troubleshooting ........................................... 13
FCC Statement and Warranty Statement ...... 15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Winegard ConnecT 2.0+ and is the answer not in the manual?

Winegard ConnecT 2.0+ Specifications

General IconGeneral
BrandWinegard
ModelConnecT 2.0+
CategoryExtender
LanguageEnglish

Related product manuals