What to do if my Winegard SK-1000 stow failure is unknown?
If the Winegard TV Antenna shows a stow failure with an unknown reason, check the data cable connection on the back of the Trav’ler Interface to ensure it is properly connected.
What to do if my Winegard TV Antenna stow failed and is not stowed?
If the Winegard TV Antenna stow failed and is not stowed, try to stow the Trav’ler again. If it fails again, check for obstructions.
What to do if Winegard SK-1000 shows 'STOW FAILURE ANT NOT STOWED'?
If your Winegard TV Antenna fails to stow and displays 'STOW FAILURE ANT NOT STOWED', do not move the vehicle. Attempt to stow the Trav’ler again. If it continues to fail, inspect for any obstructions that may be preventing the stowing process.
What to do if my Winegard SK-1000 TV Antenna shows 'EL HOME FAILURE'?
If the Winegard TV Antenna displays 'EL HOME FAILURE', something is likely preventing the TRAV’LER Mount from raising to find the HOME position. Inspect for any obstructions, especially if the unit was recently manually raised or the electronics have been replaced.
How to fix Winegard SK-1000 TV Antenna 'ANTENNA CONNECTION FAILED' error?
If your Winegard TV Antenna displays 'ANTENNA CONNECTION FAILED' or 'STOW FAILURE STOW UNKNOWN', the data cable connection on the back of the Trav’ler Interface may not be properly connected. Check to ensure it is securely attached.
General| Brand | Winegard |
|---|---|
| Model | SK-1000 |
| Category | TV Antenna |
| Language | English |
To Next Page
