Maintenance
2751−1/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
5/ 5
4.2 Recommended jointing compound and adhesive primers
Jointing
compound
Hardener Adhesive
primer
Manufacturer
Elastosil
RT 622 A
RT 622 B G 790 Wacker-Chemie Gmbh
Geschäftsbereich Silicone
Hanns-Seidel-Platz 4
D-81737 München
Silcoset
105 RTV
Silcoset
Curing Agent A
Silcoset Primer AMBERSIL LTD
Wylds Rd
Bridgwater
Somerset
TA6 4DD
Uk-Great Britain
Remark: Mixing and applying of the jointing compounds must be done according
to the instruction of the respective manufacturer.
Products of other manufacturers are also allowed when fulfilling the below specifi-
cation:
− Containing no acid, e.g. no acetic acid.
− Resistant to oil, marine diesel oil, heavy fuel oil and water at a permanent tem-
perature of approximately 100 _C.
− Short age hardening time, i.e. at least 24 hours under ISO standard reference
conditions.
− Well flowing to properly fill out the annular space, in order to avoid the creation
of any hollow space.
− Good adhesion on adhesive-primed metallic surface.
− Easy to prepare and combine.
− None or only minimal surface shrinkage.
− The jointing compound must remain elastic, as a cylinder cover stud may be
removed at any given time.
2013
Removal and Fitting of Exhaust Valve, Replacing of Elastic Studs
To Next Page
Loading...
