Maintenance
3206−1/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
1/ 2
Key to Illustration:
1 Turning gear
2 Pinion
3 Toothing of flywheel
1. General
Before putting the turning gear into operation, the condition of the tooth flanks, i.e.
the lubricant of pinion 2 and toothing of flywheel 3 must always be checked. See
also 0750−1 in the Operating Manual.
For maintenance of the turning gear the instructions recommended by the
manufacturer must be followed.
A
1
2
3
WCH00339
I
I
V2 / 2013
Turning Gear
Checking the Toothing
To Next Page
Loading...
