Maintenance
6708−1/A2
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
1/ 3
Tools: Key to Illustrations:
2 Manual ratchets (WLL 800 kg) 94016 (H1) 1 Receiver 12 Screw
2 Air flaps 13 Sleeve
3 Water separator 14 Pressure spring
4 Hinged cover 15 Disc
5 Screw 16 Door
6 Intermediate flange 17 Coupling
7 Screw 18 Water drain
8 Spring washer 19 Supporting plate
9 Tension sleeve
10 Screw
11 Cover AF Seating face
1. General
The water separator should be inspected after completing the first operating year.
The cleaning interval for future servicing should be established on the basis of the
degree of contamination found. If the air suction filter of the exhaust gas turbochar-
ger is well maintained, the degree of contamination of the water separators should
not be considerable.
2. Inspection
⇒ Open door 16 on one side of the scavenge air receiver.
⇒ Enter the scavenge air receiver, tilting up air flaps 2, and check water separa-
tor 3 for damage and fouling.
⇒ Separate couplings 17 from water drains 18.
⇒ Unscrew hinged cover 4 (52 kg) and tilt it down by means of a manual ratchet.
Check the water drains for free passage.
A
018.959/09
2
16
3
17
4
18
2013
Water Separator
Maintenance of Water Separator 2-part Water Separator
CHECK
To Next Page
Loading...
