WinGD WARTSILA RT-flex58T-E - Page 6

Summary for Maintenance Manual
(MM)
Page No. Title Subject
Date No.
new exch.
Manual
Modification Service
Engine Documentation
RT-flex58T-E
Modification
Page or
5801-1/A2 (1, 2) 2015-08 EAAD085742 Regulating Linkage
New Fuel Pump Actuator (Digital Plus Actuator). Illustrations
and procedure changed
x
Group 8 2015-08 Table of Contents New instruction for HP injection pipe with ICU Mk3. x
8733-1/A1 (1, 3) 2015-08 EAAD085234
HP injection Pipe to
Injection Valve
Tool numbers changed. Fig D changed. Procedure in para 3
changed
x
8733-1/A2 2015-08
HP injection Pipe to
Injection Valve
New instruction for HP injection pipe with ICU Mk3. x
9403-3/A1 (1, 5) 2015-08 EAAD086016 Pre-Tesnioning jacks New jack for Cyl. Cover studs x
9403-5/A1 (30) 2015-08 EAAD085234 Tool List
Tool numbers 94871 and 94871A added, new cyl. Cover press
CF94215, 94278A and 94278B added
x
Date of publication 2016-02-18
2751-2/A1 2018 WinGD Input
Exhaust Valve:
Disassemble and
Assemble
Pge: 7. Paragraph 3.4 - Procedure changed. x
Group 5 ToC 2018 WinGD Input ToC Analog Actuator changed to Digital Actuator x
5801-1/A2 2018 WinGD Input
Regulating Linkage -
Woodward ProAct II -
Digital Actuator
Procedure changed. Analog actuator replaced with digital
actuator
x
5552-5/A1 2018-02 Wartsila Input
Lubrication of Supply
Unit during
Maintenance
Procedure changed
x
9403-5/A1 2018-02 DAAD083068 Tools List Page 36: 94844 Lubrication device added. x
Date of publication 2018-02
2/2 10/04/2018