Winget 4B2000 - Page 139

GEARBOX (with Salisbury axle) C - 2
Item Part no Serial no Description Qty
$ From gearbox batch no. B1238.
When replacing layshaft 30101A0223 on gearboxes prior to batch no B1238,
layshaft assembly 30101A0268 should be ordered.
This assembly consists of layshaft 30101A0266 and bearing 30101A0267, and
replaces the previous assembly of layshaft 30101A0223 and bush 30101A0244.
The two layshaft assemblies are interchangable.
(New gearbox oil capacity now 2 litres - previously .85 litres).
- 30190A01 / Jun-86
GEARBOX, assembly,
Lister engine
(with straight gear lever) 1
- 30190A02 / Jun-86
GEARBOX, assembly,
Petter engine
(with straight gear lever) 1
- 30190A06 JUN 86/ GEARBOX, assembly
(with cranked gear lever) 1
- 20097A07 / Jun-86
LEVER, gear, straight,
Lister eng.
1
- 20097A06 / Jun-86
LEVER, gear, straight,
Petter eng.
1
- 30101A0901 JUN 86/ LEVER, gear, cranked 1
1 30101A0201 KNOB, gear lever 1
2 95S03 NUT, locking
4 30101A0203 CAP, gear lever 1
5 30101A0204 COVER, gear lever 1
6 30101A0205 SPRING, gear lever 1
7 30101A0206 PLATE, gear lever retaining 1
8 28S03E SCREW, mainshaft 1
9 30190A0101 WASHER, tab 1
10 30190A0102 WASHER, reduction pin 1
11 30190A0103 PINION, reduction 1
12 28S01B SCREW, bearing retainer 2
13 30190A0104 RETAINER, bearing 1
14 30101A0210 BEARING, mainshaft, rear 1
15 30101A0211 GEAR, output 1
16 30101A0212 SPACER, output gear 1
17 30101A0213 WASHER, reverse pinion shaft 1
18 102S04 NUT, castle, reverse spindle 1
19 44S02C PIN, split 1
20 30101A0215 CIRCLIP 1
21 28S01D SCREW 2
22 67S01 WASHER, shakeproof 12
23 30190A0105 CLIP, layshaft bearing 2
24 30101A0216 BEARING, layshaft 1
25 30101A0217 SPACER, bearing 1
26 30101A0218 PINION, reverse 2
V601140 / issue 01 0891 continued >