Page 27
Winkhaus STV
Operating Manual EAV 0124653 0505
Subject to technical changes
Winkhaus STV GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · Germany · www.winkhaus.de · stv@winkhaus.de
NOTICE!
All transponders have been deleted and the reader unit is at delivery status.
The delete-all card and the programming card are saved, a transponder is
not saved.
In this state you cannot open the door via transponder or card; rather you
will have to teach-in the transponder anew.
NOTICE!
Keep the programming cards at a safe place to prevent any kind of misuse.
If you lose the cards, the reader unit will have to be exchanged in its entire-
ty! Please contact customer service in such a case.
4.3. Electronic automatic locking system with wireless remote control
4.3.1. Operation
• It is operated via the wireless hand-held transmitters working contactless.
• The set of 3 wireless hand-held transmitters delivered have already been taught
(key A).
• To trigger a signal, press the A key of a taught-in hand-held transmitter. The red LED
will turn on and the door will be unlocked.
4.3.2. Programming
You can program the wireless remote control via the wireless hand-held transmitter or
the wireless receiver.
We recommend programming it by using the wireless hand-held transmitter.
The programming per hand-held transmitter is not possible for the wireless receiver for
additional applications.
Teaching a wireless hand-held transmitter directly at the hand-held trans-
mitter (recommended)
key B
red LED
key A
4. Operation/Programming
To Next Page