To Next Page
W
williamsmartinSep 13, 2025
What to do if no signal is found at the Alarm Output port of Wisenet XNP-6120H?
- Aalison64Sep 13, 2025
If no signal is found at the Alarm Output port of your Wisenet Security Camera, check alarm output port settings.
What to do if no signal is found at the Alarm Output port of Wisenet XNP-6120H?
If no signal is found at the Alarm Output port of your Wisenet Security Camera, check alarm output port settings.
General| Model | XNP-6120H |
|---|---|
| Sensor Type | 1/2.8" CMOS |
| Lens Type | Motorized Varifocal |
| Focal Length | 2.8 ~ 12 mm |
| Optical Zoom | 4x |
| Digital Zoom | 16x |
| Day/Night | Yes (ICR) |
| Video Compression | H.265, H.264, MJPEG |
| Ingress Protection | IP66 |
| Impact Protection | IK10 |
| Resolution | 1920x1080 (Full HD) |
| Minimum Illumination | 0.05 lux (Color), 0.01 lux (B/W) |
| Wide Dynamic Range (WDR) | 120dB |
| Audio | Line in/out |
| Network Interface | RJ45 10/100/1000Mbps |
| Power Input | PoE (802.3af) or 12V DC |
| Power Consumption | Max 15 W |
| Operating Temperature | -30°C ~ +60°C |
| Weight | 1.2kg |
