Need help?Do you have a question about the Wisper SW102 and is the answer not in the manual?
Identifies the product as an Intelligent OLED display, model SW102.
Highlights minimalist design, OLED screen, IP65 waterproofing, and USB/Bluetooth connectivity.
Specifies suitability for electric power assisted bicycles according to EN15194 standard.
Details materials used for the shell (ABS+PC) and window (tempered glass).
Explains the breakdown of the serial number into factory code, year/week, version, and serial digits.
Lists technical details: power supply, current, screen resolution, communication, temps, and waterproof level.
Describes features like button operation, password access, speed display modes, assist levels, and indicators.
Provides instructions for mounting the display on the handlebar, including torque specifications.
Covers the boot interface, basic interface, function interfaces (I & II), and setting interface.
Explains the function of each button (Power, M, Up/Down arrows) and basic operations.
Details how to turn the display on/off, select assist modes, and switch information displays.
Covers walk assist mode activation and headlight on/off control.
Explains the 5-level battery power display and voltage-based indications.
Guides through setting units, password, wheel diameter, auto-shutdown, and system info.
Instructions on how to clear trip mileage, riding time, and speed data.
Lists common error codes, their fault descriptions, and checking methods.
Details wire colors, functions (VCC, GND, TX/RX), and connector pinout.
Safety precautions for plugging/unplugging and avoiding harsh environments.
To Next Page
General