9 Error
information
The display can alert the bike failure, if failure detected, the display interface will show the
error code. Interface shown as below:
Error code definition
Error code table:
Error
code
Fault
desc
ription
Checking
method
"04" shown at speed throttle doesn't turn back to zero position Check if the throttle return to zero position
"05" shown at speed
throttle failure
check throttle
"07" shown at speed
overvoltage protection Check the voltage of the battery
"08" shown at speed failure of motor's hall signal wire Check motor
"09" shown at speed failure of motor's phase wire Check motor
"11" shown at speed failure of the controller's temperature sensor Check controller
"12" shown at speed failure of the current sensor Check controller
"13" shown at speed failure of the temperature of the battery Check battery
"14" shown at speed failure of the temperature of the motor Check motor
"21" shown at speed failure of the speed sensor check the position of the speed sensor
"22" shown at speed failure of the BMS communication Check battery
"30" shown at speed communication failure check the connector of the controller
To Next Page
Loading...