WT53R-485 Manual v23-0720 | www.wit-motion.com | support@wit-motion.com
22
5.9
Alarm Threshold
The sensor has a distance alarm function, and the alarm threshold can be set.
When the distance is less than the alarm threshold, the alarm line will generate
an alarm level (low level). The process of setting the alarm threshold is as
follows:
After connecting the sensor normally, click "Configure" to select the
corresponding device and enter the configuration interface.
Click “Alarm threshold” after entering the threshold for Alarm Threshold. The
alarm threshold setting range is 40~400cm (15.748"~157.480"). As shown
below, set it to 1m (39.370"):
To Next Page
Loading...
