Software installation
2.Driver and Configuration file
Please copy the driver file after the software installation is
complete.
Open our Cd，and find the...English manual>>Driver file>>
(Ethernet control card driver is ).Then
copy it to MACH3 software folder...C:/Mach3>>
（see Figure）
NcUsbPod.dll NcEther.dll
PlugIns folder
2.1 Driver installation
2.2 Configuration file installation
Open our CD,and find the ...English manual>>MKX-V-
Configuration file>> , then copy it to MACH3
software folder... folder.(see Figure)
Mach3mill.xml file
C:/Mach3
3
To Next Page
Loading...
Need help?
General
