WMF 1120 Series User Manual

44
User Manual WMF1100 S
Software | Beverages
Descaling
The water hardness, flow rate, and whether awater
filter is used are the factors that determine the number
of litres remaining before descaling is required. This
litres indication is calculated and displayed by the
WMF1100 S.
Brewer care
After 15,000brewing cycles, the O-ring on the brewer
needs to be replaced.
When the service life has been exceeded, the fact that
it is due for replacement is reported daily.
 Replace O-ring
 Confirm the change
5.4 Beverages
General information
Dispensing test
For many beverage settings, it is possible to start
adispensing test with the new settings before the
recipe is saved.
 Modify the settings as desired
 Touch the “Dispensing test” pad
The beverage is dispensed using the newly changed
values.
 If the beverage is as desired, touch the Save symbol
The recipe is saved.
Save recipes
The modified recipe is saved here.
DS_03_04_01_07
Descaling
Descaling chapter
w starting on page 78
DS_03_04_01_05
Brewer care
Brewer care
DI_getr
espresso
Touch the desired beverage button
Espresso
Cappuccino
Café Crème Latte Macchiato
Ristretto Milk coffee
DI_05_01_00_00
Example: cappuccino button

WMF 1120 Series Specifications

General

Brand	WMF
Model	1120 Series
Category	Coffee Maker
Language	English