89
User Manual WMF1100 S
Care | Manual cleaning
7.6.10 Clean the mixer
Cleaning will be more frequent depending on powder
consumption.
Perform amixer rinsing
Open the door
Pull the mixer bowl forward by the handle
Lift up the mixer bowl slightly to allow the rest of
the water to drain out
Pull off the mixer hose running from the mixer bowl
to the spout and remove it from the guide
The propeller for the mixer is now visible.
The propeller can be cleaned with acloth
Dismantle two-piece mixer bowl
Clean both parts of mixer bowl and mixer hose
under warm running drinking water
Allow all parts to dry completely
On re-assembly, all openings must face in the
same direction.
Insert the mixer hose into the spout through the
guide
Replace mixer bowl until she engages in the lock
Attach mixer hose on the mixer bowl
Scalding hazard
• If the mixer hose is not firmly attached,
hot water or hot powder beverage can be
discharged inadvertently.
> Place the mixer hose on the mixer bowl.
Clean the mixer
Replace mixer hose
CAUTION
Follow the Safety chapter
w starting on page 7
To Next Page
Loading...
Need help?
General
