86
User Manual WMF1100 S
Care | Manual cleaning
Remove coffee grounds residue using apaint-brush
or scrubber
Rinse the brewing unit under running water
Potential damage
• The brewing unit can be damaged by
cleaning agent or in adishwasher
> Only use water to clean the brewing unit.
> Never clean the brewing unit in the
dishwasher.
Dry the brewing unit with acloth
Allow to dry completely before reinstalling in the
coffee machine.
Remove coffee grounds residue from the chute.
Wipe out the coffee grounds forward or suck out
using avacuum cleaner
Replace springs in insertion chute (illustration5)
Use the guides.
Refit the brewing unit after it has been dried.
Turn the thread at the head of the brewing unit
clockwise (illustration3) until the scraper is completely
folded in again.
Hold the latch down and push back the brewing
unit all the way back to the back wall of the shaft
Push the brewing unit upwards until it engages in
the retaining catch
Insert the grounds container
Replace drip tray
If the brewing unit cannot be inserted without
resistance:
> Turn the thread on the brewing unit head
slightly to the left or right with the multitool
until the brewing unit slides into the guide.
> Never use force. Danger of breakage.
IMPORTANT
Follow the Warranty chapter
w starting on page 107
Illustration 5
Brewing sieve
IMPORTANT
Follow the Warranty chapter
w starting on page 107