WMF 950 S - Milk System Rinsing

61
User Manual WMF950S
Care | Cleaning programs
After acompany holiday (several days or weeks)
we recommend running the cleaning program at
least twice before reusing the machine.
The Click+Clean adapter is required for cleaning.
Milk system cleaning must be performed after
250brewing cycles, or after 7days, whichever
comes first.
Start
✻ Start the Care menu
✻ Touch System cleaning
✻ Follow the information on the display
7.3.2 Milk system rinsing
Health hazard/scalding hazard
• During rinsing, hot rinsing water flows out of
the combi spout.
> Never reach under the spouts while cleaning.
The milk system rinsing can be started separately.
This makes sense if there are longer periods between
dispensing milk beverages.
The milk system rinsing rinses the milk hose, the milk
nozzles, and the milk foamer.
✻ Start the Care menu
✻ Touch Milk system rinsing
✻ Follow the information on the display
IMPORTANT
During cleaning, asmall amount
of rinse water may get into the
coffee grounds container.
This is not an error.
CAUTION
Follow the Safety chapter
w starting on page 7