WMF 950 S - Page 70

70
User Manual WMF950S
Care | Manual cleaning
✻ Perform amilk system rinsing
✻ Disconnected the milk hose
✻ Press on the sides of the grip on the milk foamer
and pull it out along with the steam nozzle and the
milk hose
✻ Disassemble the milk foamer into its component
parts
✻ Remove the foamer gasket at the spout
✻ Turn the milk nozzle to remove it
✻ Clean the individual components thoroughly under
warm, flowing water
✻ Clean the combi spout with aclean, damp cloth
✻ Clean the channels and connections with the
included cleaning brush
The milk hose that was removed and the milk nozzle
can be cleaned using the cleaning brush, as needed.
(3324080000and 3341368000)
✻ Remove the Click+Clean adapter from the milk hose
✻ Insert the brush into both ends of the hose
(andthrough the milk nozzle) so that all areas
arecleaned
✻ Repeat the process several times if necessary
✻ Mix 5ml of WMFspecial cleaner with 500ml of
warm drinking water
✻ Place all components, including the cleaning brush,
in the prepared cleaning solution
All parts must be completely immersed in the cleaning
solution for at least 5hours.
✻ Clean all parts thoroughly with abrush
✻ Rinse all parts very thoroughly with drinking water