WMF 950 S - Installation Location and Clearances

91
User Manual WMF950S
Appendix: Technical data
Ambient temperature +5°C to maximum +35°C
(empty the water system in case of frost).
Maximum humidity 80 % relative humidity without condensation.
Do not use unit outdoors.
Installation surface/
water spray
The device must be placed and levelled on
ahorizontal, sturdy, water-resistant, and heatproof
base.
The device must not be cleaned using awater jet.
The device must be installed where it is protected
against water spray. The device must not be located
on asurface that is sprayed or cleaned with awater
hose, steam jet, steam cleaner, or similar devices.
Installation clearances For operating, service, and safety reasons the
machine should be installed with aclearance from
the building or non-WMFcomponents of not less
than 50mm at the sides and 50mm at the back.
A minimum working space of 800mm in front of
the coffee machine is recommended. Clearance
of at least 200mm above the product hopper is
recommended. The height of the installation surface
above the floor is at least 950mm. If the coffee
machine connections are to be run downwards
through the counter, please make space for the
lines, which can reduce the usable space below the
machine.
Installation dimensions
of the water filter
See the User Manual for the water filter.