Wolf CGB-2 - Checking Fault Messages

6 3064812_201804
2. Checkingfaultmessages
Any faults that have occurred during operation can be called up on the ‘Contrac-
tor’ level under ‘Message history’. Press rotary selector 5, select ‘Contractor’,
enter the code and call up ‘Message history’. The last 40 fault messages will be
displayed which can provide the contractor with information for maintenance.
Messagehistoryin
AM or BM-2
Either an AM display module or a BM-2 programming unit can be installed in
the front panel for operating the appliance.
The ON/OFF switch (integrated in the Wolf logo) switches the appliance off
across all poles.
ON/OFFswitch
Operatingmode
Heating mode
Burnerstatus
ON
Status
1
2
3
4
5
Status display Function display
1 - 4 Quick start keys
5 Rotary selector with pushbutton function
Front panel with integral
ON/OFF switch