Wolf CGB-2 - Heat Exchanger Reassembly Procedures

20 3064812_201804
14.Assemblingtheheatexchanger
Assemblyofthecombustionchamber
Install cobustion chamber pot.
Turn pot until stop and secure by drawing downwards.
Check secure t.
Put combustion chamber cover outo the chamber and
press down regularly.
Check perfect t of combustion chamber gasket.
Lock both retaining brackets with assembly tool.
Putonplugsoutoignitionandionisationelectrodes
aswellasonignitiontransformerandsafetytempe-
rature cutout (STB)