Wood-mizer LT40 Series - Belt Sizes; Blade Sizes

Safety & General Information
Belt Sizes
Safety & General Information HDdoc012020 1-17
1
1.6 Belt Sizes
See Table 1-2. Belt sizes for the LT40 Series DH are shown.
1.7 Blade Sizes
See Table 1-3. Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient sawing
for all models of sawmills. The engine/motor size of your sawmill and the type of wood you saw
should determine which blade you choose for optimum performance.
1
See The Blade Handbook for blade hook angle, tooth height, and tooth set specifications.
Description Belt Size Wood-Mizer
Part #
Engine Drive Belt (G25) 2BX72 P09555-2
Engine Drive Belt (D33) 3BX72 014085
Alternator Belt (G25) AVX 13x920 085753
Alternator Belt (D33) 6PK1080 088181
Blade Pulley Belts
B57
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II, or
Browning belts only.
P04185
TABLE 1-2
Softwood Medium
Hardwood
Frozen Timber or
Dense Hardwood
5-15HP Gas B275IH1030
B275IH741030
B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed
to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™ blades use a 10/30
profile.
7.4-11kW (10-15HP) Electric
16-25HP Gas
33HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
B375IH929
1
15-18.5kW (20-25HP) Electric
42HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 1-3
1.LT40 Sawmill is equipped with a blade with a length of 4.01 m.