3. Press > once, the display will be as shown. The time will be
flashing.
4. Use + or – buttons to adjust 1st time as required.
5. When the time has been set, press >.
6. Use + or – buttons to adjust required temperature (shown
flashing).
Repeat above steps 3-6 until the 6 periods have been set for
Monday. The small 1 in lower half of screen shows time
period is being set. e.g. 1=1st period, 2 = 2nd period etc.
7. W h e n M o n d a y h a s b e e n s e t .
Repeat steps 3-6 until all 7 days of the week have been set.
8. When the final temperature has been set press > to con-
firm settings.
9.To exit press < or > until you return to auto mode with the
bottom arrow pointing at Auto.
To set holiday mode:
1. Press < twice, the display shows time flashing.
Time periods between 1 to 23(Hr) hours and 1 to 199(d)
days can be set.
2. Press + or - buttons to adjust the count down time as
required.
1=1st time
period
To Next Page
Loading...
Need help?
General
