Auto
mode indicator
3. Press > once to confirm, the display will show temperature
flashing.
4. Press + or - buttons to adjust temperature and press > to
start holiday count down time.
Alternatively after 10 seconds the temperature will stop flashing
and holiday count down time will start.
Display shows count down time and ambient room
temperature.
5. To exit the holiday mode press the < or > once, to return to
auto.
To switch the thermostat OFF:
Press the + and – simultaneously for 5 seconds until the OFF is
displayed. The thermostat and heating system will now be OFF
unless the temperature in the controlled space falls below 7°C,
the frost protection set point.
Please note this does not affect the operation of the domestic
hot water where provided. To switch ON the thermostat, press
any key to return to auto mode.
User Options
User Options (shown in table on page 10) can be accessed
from Auto or Man by pressing < and > simultaneously for
3 seconds.
When you have accessed the User Options Menu press > to
scroll through selectable options.
The settings for each option can be changed by pressing + or -
as required.
Pressing > accepts the change and moves to the next option.
NOTE: To exit User Options press < and >simultaneously
for 3 seconds.
To Next Page
Loading...
Need help?
General
