PROGRAMMABLE SETTINGS
ADJUSTING TIMES & TEMPERATURES
Digistat Optimising Programmer -
5-2 Day operation:
1. With the product operating as normal in Auto mode press
> once.
The display will flash the Monday to Friday day indicators.
2. Press > once, the display will be as shown.
The time will be flashing.
3. Use + or – buttons to adjust 1st time as required.
4. When the time has been set, press >.
The temperature display will be flashing
5. Use + or – buttons to adjust required temperature.
6. Press > to confirm and move to next time and temperature
periods to be adjusted confirm changes by pressing > button.
(max 6 time periods).
NOTE: The small 1 in lower half of screen shows time period
being set. e.g. 1=1st period, 2 = 2nd period etc.
7. W h e n t h e l a s t w e e k d a y t e m p e r a t u r e h a s b e e n s e t p r e s s >
once to confirm and allow adjustment of the weekend
program.
8. Use + and – buttons and > button to set the 6 periods for
the weekend program.
9. When the final temperature has been set press > to
confirm.
10. To exit press < or > until you return to auto mode with
bottom arrow pointing at Auto.
To Next Page
Loading...
