OPERATING & INSTALLATION
INSTRUCTIONS
DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
16
Mode indicator
Hot water pre-
heat ON light
Hot water pre-heat
select button, moves
the mode indicator up
and down to select and
accept changes
Hot water pre-
heat advance
button, when
pressed brings
forward the next
ON/Off period.
Press to accept each
program setting
Setting clock, date,
time, program and
holiday function
+/- changes
ON/OFF times
Modes
DT10RF Receiver Programmer
The Programmer has factory set programs for
ON/OFF periods for hot water pre-heat, which are
described on the following pages.
These factory installed settings can be used without
any further programming.
This section also details how to program the
DT10RF Receiver with new weekday and weekend
times to suit your lifestyle requirements.
How to set the clock, time and date, is also given,
but should not require adjustment as these are
factory set.
A holiday function is also provided, where you can
set the number of days that you are away on holiday.
The boiler will provide frost protection for those
number of days.
After that set number of days the boiler will revert to
the normal operating program, ready for your return
from holiday.
DT10RF RECEIVER
OPERATING CONTROLS
To Next Page
Loading...
Need help?
General
