Hot Water:
1. Press select button to choose
! off = constantly OFF
!timed = up to 3 ON and 3 OFF time periods as
programmed
!once = ON from first ON until third OFF time
period as programmed
See table overleaf for details of program
!on = constantly ON
2. Press “advance” button:
ON = hot water pre-heat light on
(hot water pre-heat stays on until
next off time period)
OFF = hot water pre-heat light off
(hot water pre-heat stays off until
next on time period)
DT10RF RECEIVER
OPERATING CONTROLS
DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
17
To Next Page
Loading...
