DT10RF OPTIMISING PROGRAMMER
INSTRUCTION MANUAL
8 716 115 494a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
21
Setting SAT - SUN:
1. Press OK to select weekend.
NOTE: Speed up the display by holding down
the + or - buttons.
2. Press + or - to change the ON time.
3. Press set? to set the ON time and select the
OFF time.
4. Press + or - to change the OFF time.
5. Press set? to set the OFF time and select the
next ON time.
Repeat operations 2 to 5 to set the second and third
ON/OFF times.
NOTE: After pressing set? for the third OFF time,
SET SAT are displayed....
If you do not require individual weekend
times, then press set? until the normal
display is resumed.
DT10RF RECEIVER
PROGRAMMABLE SETTINGS