GB IRE
GB
IRE
00800 34 99 67 53
Operational safety instructions for your multifunction-tool
− Hold the multifunction-tool by the insulated handles when performing
work where there is a risk of the fitted tool being used coming into contact
with hidden power lines. Contact with a live line could also energise
metallic parts of the device and inflict an electric shock.
− Always wear protective goggles and a dust mask when sanding;
especially when sanding overhead.
− Wear ear protection.
− Wear protective gloves when changing the fitted tools. Fitted tools
become hot after prolonged use.
− Use the multifunction-tool only for dry sanding.
− Only use sand paper of the length that you need. Any paper protruding
from the sanding plate can cause serious injury.
− Only use the charger in dry indoor areas.
− Never expose the multifunction-tool to high temperatures (heaters etc.)
or to the effects of the weather (rain etc.).
− Keep your hands away from the work area. Do not reach under the work
piece. There is a risk of injury resulting from contact with the saw blade or
scraper.
− Grip the multifunction-tool with two hands and maintain a stable posture to
avoid the risk of serious injury. When working with the multifunction-tool,
always hold it firmly with both hands and provide for a secure stance.
− Only scrape materials that have not been moistened (e.g. wallpaper) and
do not scrape on a wet base.
− Adopt a stance that prevents injury in the event of slipping off the work
piece.
− Only use fitted tools that are in proper technical condition.
− Fitted tools may become extremely hot. After making a cut, do not touch
the fitted tool and make sure that the multifunction-tool is kept in a safe
place once you have finished work.
− When working on masonry or ceilings, take note of the location of electric
pipes as well as water and sewage pipes.
− Never place the multifunction-tool or the accessories on or near hot
surfaces (e.g. radiators).
To Next Page
Loading...
