EasyManua.ls Logo

Workzone WMW 300-2 - Noise and Vibration Data

Workzone WMW 300-2
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Noise/vibration information
22
300W multifunction-tool
meister-service@meister-werkzeuge.de
AFTER SALES SUPPORT
22
GB IRE
GB
IRE
00800 34 99 67 53
Noise⁄vibration information
WARNING!
Health hazard!
High levels of noise and vibrations may result in injury.
Wear ear protection and suitable protective clothing when
working with the device.
Noise emission values
Measured as per DIN EN 60745-1. The noise at your workplace may exceed 85 dB (A);
protective measures are necessary in this case (wear suitable ear protection).
Sound pressure level: L
pA
: 86.10 dB(A)
Sound power level: L
WA
: 97.10 dB(A)
Measurement uncertainty: K
pA
: 3 dB(A)
K
WA
: 3 dB(A)
Hand/arm vibration
Vibration emission value: a
h
: Idle: Handle: 2.553 m/s
2
Additional handle: 3.0 m/s
2
Sanding mode: Handle: 6.453 m/s
2
Additional handle: 7.694 m/s
2
Uncertainty: K: 1.5 m/s
2
The aforementioned values are noise emission values and therefore, do not necessarily
represent safe values for the workplace at the same time. The correlation between
emission and immission levels cannot reliably provide for a conclusion as to whether
additional cautionary measures are necessary or not.
Factors that could affect the respective immission level present at the workplace involve
the specification of the work area, the surrounding area, the duration of exposure, other
noise sources etc.
You must also observe any divergences in national regulations with respect to
permissible workplace levels. The aforementioned information does, however, allow
the user to better assess dangers and risks.

Other manuals for Workzone WMW 300-2

Related product manuals