GB IRE
GB
IRE
00800 34 99 67 53
ATTENTION!
The aforementioned vibration emission level (vibration value) has been measured
in accordance with a test method standardised in DIN EN 60745-1 and can be used to
compare one power tool to another. It is also suited for preliminary estimation of loading
by vibration. The actual vibration emission value can, as described below, differ by type
of application:
• Condition of the multifunction-tool or proper maintenance,
• Type of material and use of the multifunction-tool,
• Use of the right accessories and whether they are in good condition,
• A firm grip of the multifunction-tool by the operator,
• Proper use of the multifunction-tool as described in this user manual.
If the multifunction-tool is improperly used it can cause vibration-related ailments.
ATTENTION!
Depending on the type of use or conditions of use, the following safety measures must
be taken to protect the user:
− Try to avoid exposure to vibrations as much as possible.
− Only use accessories in perfect working order.
− Wear vibration-damped gloves when using the multifunction-tool.
− Follow the user manual on care and maintenance of the multifunction-tool.
− Avoid using the multifunction-tool at temperatures below 10C.
− Plan your work steps so as not to use the strongly vibrating multifunction-tool over
several consecutive days.
To Next Page
Loading...
