GB IRE
GB
IRE
00800 34 99 67 53
4.
The tool holder
does not move
after switching
on the
multifunction-
tool.
There is dirt, wood
chips or other objects
located in the gap of
the tool holder.
− Pull the mains plug out of the
socket and clean the gap of
the tool holder with a vacuum
cleaner if necessary.
The multifunction-tool
is defective.
− Contact the After Sales Support
of the manufacturer.
5.
The oscillation/
speed can not
be increased or
decreased.
The speed control
3
is dirty.
− If necessary, clean the speed
control and the gap with a
vacuum cleaner.
Accessories
You can purchase suitable accessories such as sanding discs from commercial outlets
(e.g. Bosch).
Technical data
Product-specific data
Model/type: WMW 300-2
Model number: 5404133/4
Article number: 93730
Electrical data
Supply voltage: 230–240 V~
Mains frequency: 50 Hz
Power consumption: 300 W
Idle speed n
0
: 15,000–23,000 min
-1
Physical data
Dimensions without accessories and cords: 308 × 63 × 99 mm
Weight without tools: 1.6 kg
To Next Page
Loading...
