GB IRE
GB
IRE
00800 34 99 67 53
• Use of the multifunction-tool for commercial or industrial applications as well
as in connection with the trades;
• Operation or maintenance of the multifunction-tool by persons not familiar
with how to handle the multifunction-tool and/or who are not aware of the
related risks.
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out.
The following risks may arise due to the nature of the multifunction-tool:
• Projection of parts or breakage of the sanding surface, the fitted tool or the material
being processed pose a risk of severe injury or blindness if the prescribed protective
goggles are not worn,
• Contact with sharp or hot parts of the work piece or the fitted tool during operation
or while performing maintenance,
• Damage to hearing if the prescribed ear protection is not worn,
• Inhalation of particles produced whilst sanding the material as well as the surface
being sanded or polished.
General power tool safety instructions
WARNING Read all safety instructions and instructions.
Failure to follow the safety instructions and instructions may result in an
electric shock, fire and/or severe injury.
Keep all safety instructions and instructions for future reference.
The term “power tool” used in the safety instructions refers to mains-operated
power tools (with a power cable) and battery-powered power tools (cordless).
Work area safety
a) Keep your work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
To Next Page
Loading...
