HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 16 -
5. Using Orca PAD48 with Software
5.1 Creating MIDI Presets with the Orca PAD48 Software Editor
5.1.1 Overview: What is a Orca PAD48 Preset?
Thanks to the Orca PAD48 Software Editor it’s possible to configure the Orca PAD48 to work with practically any device or
software capable of responding to MIDI information.
To summarize, here are some examples of what you can do with a Orca PAD48 preset:
● Assign pads to send MIDI Machine Control commands (MMC)
● Use the pads to transmit MIDI notes
●Switch between two values of any MIDI CC# by playing a pad
●Assign an encoder to control any MIDI CC# and define its operational range
●Assign a slider to control any MIDI CC# and define its operational range
●Save the entire set of altered controls to one of Orca PAD48’s eight preset locations
●Define another seven sets of parameter assignments and save each one to a different memory location
●Recall any of the eight personalized presets easily and immediately
5.1.2 Assign a Pad to Start/Stop MMC
One feature that often comes in handy with a controller keyboard is the ability to start and stop a song without having to
use the computer keyboard or mouse. It’s really easy to set up the Orca PAD48 pads to do that.
For example we’ll use Pad 7 to send Stop commands and Pad 8 to send Start commands. This is accomplished through
the use of MIDI Machine Control commands, which you’ve probably seen abbreviated as “MMC”.
5.1.2.1 Select the Pad Mode
To Next Page
Loading...
