Getting started
EN
2. Update the software
It is recommended you to update the software to the latest firmware. It helps Landroid Vision become smarter. Please note that
Landroid Vision should be updated to the latest firmware at the first time.
Over-the-Air (OTA) updates
If your Landroid Vision is connected to your Wi-Fi network, you will be notified that new software is available via the App. Once
you confirm, the update will happen automatically Over-the-Air.
NOTE: Make sure Landroid Vision is charging or the battery capacity has reached 50% prior to starting the firmware update.
3. Define zones (See Fig. 30 - Fig.31)
The Landroid Vision will follow the lawn edge in a circle to and define the zone:
• at the first time when it is started and comes out of the charging base.
• there is a new zone for Landroid Vision to cut.
Steps to define zones:
• Position Landroid Vision in the charging base.
• Rotate clockwise to access the main menu, select “General settings” and press .
• Rotate to select “Define zones”, press to confirm.
• Landroid Vision will start from and return to charging base to complete the zone defining process.
NOTE: Make sure the first time Landroid Vision starts at the charging base and has at least 50% battery.
23
Welcome
Input PIN
[ **** ]
Set date & time
Date(dd/mm/yy):
Time(12h):
2020/07/07
08:37 PM
Set date & time
Date(dd/mm/yy):
Time(12h):
2020/07/07
08:37 PM
General setting
Language
Time format
Date format
Set date & time
1
2
1
2
1
2
Wed.11/29 09:00PM
Wed.11/29 09:00PM
General setting
Language
Time format
Date format
Set time
1
2
Input PIN
PIN code
OK
x4
Mon 11/07
Work done today
Charging
50%
00:00
Mon 11/07
Leaving house and
starting blade
be careful!
00:00
Mon 11/07
Work done today
Charging
50%
00:00
CLICK!
30
Wed.11/29 09:00PM
Wed.11/29 09:00PM
General setting
Set date&time
Rain start delay
APP Link
Define zones
1
2
1
2
31
Only for reference
To Next Page
Loading...
