EasyManuals Logo

Worx WR206E User Manual

Worx WR206E
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Safety instruction
EN
4
PRODUCT SAFETY
GENERAL & ADDITIONAL SAFETY INSTRUSCTIONS
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Carefully read the instructions for the safe operation of the machine.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
WARNING: To reduce the risk of injury to persons and damage to the machine, do not remove battery pack before switching
off the machine.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
Training
a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper
use of the appliance.
b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age
of the operator.
c) The operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
a) Ensure the correct installation of the automatic perimeter delineation system as instructed. This machine works without
boundary wire or virtual boundary. It can automatically identify the working area and non-working area through the camera.
Once the machine is turned on, the camera will automatically turn on and work at the same time. The machine recognizes
that the lawn is the working area through the camera, and the non-working area that is not the lawn. When the machine
walks to the boundary between lawn and non-lawn, it will automatically turn to return to the working area.
Add a magnetic strip to separate it from the neighbor’s lawn. The machine returns when it encounters a magnetic strip while
mowing. Return along the magnetic strip when returning.
b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other
foreign objects. Periodically inspect and clean the boundaries between grass and non-grass. Clearing boundaries helps the
lawnmower to identify the working area.
c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn
or damaged blades and bolts in sets to preserve balance.
d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.
e) WARNING! The lawnmower shall not be operated without the guard in place.
Operation
1. General
a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place.
b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
c) Never pick up or carry an appliance while the motor is running.
d) Operate the disabling device from the appliance.
- Before clearing a blockage;
- Before checking, cleaning or working on the appliance;
- After striking a foreign object to inspect the machine for damage;
- If the machine starts to vibrate abnormally, and to check for damage before restarting.
e) It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk.
f) Start robotic lawnmower according to the instructions. When the power key is switched on, make sure you keep your hands
and feet away from the rotating blades. Never put your hands and feet under the mower.
g) Never lift up robotic lawnmower or carry it when the power key is switched on.
h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower.
i) Do not put anything on top of robotic lawnmower or its charging base.

Other manuals for Worx WR206E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Worx WR206E and is the answer not in the manual?

Worx WR206E Specifications

General IconGeneral
TypeRobotic lawn mower
BluetoothYes
Noise level59 dB
Display typeLCD
Cutting width180 mm
Product colorBlack, Orange, Red, Silver
Cutting systemRotary blades
Number of blades3
Number of wheels3 wheel(s)
Maximum lawn area600 m²
Mulching function-
Maximum cutting height60 mm
Minimum cutting height30 mm
Suitable for slope up to30 %
International Protection (IP) codeIPX5
Battery typeBuilt-in battery
Power sourceBattery
Battery capacity2 Ah
Weight and Dimensions IconWeight and Dimensions
Depth626 mm
Width460 mm
Height265 mm
Weight13500 g

Related product manuals