EN
Getting started
27
CONNECTING LANDROID VISION TO THE INTERNET
Why connect Landroid Vision
Landroid Vision is an IoT (Internet of Things) device. To get full functionality out of your Landroid Vision and keep it always upda-
ted to the latest software, it is recommended to be connected to the internet via your Wi-Fi network. The more Landroid Vision
mows your lawn, it will become smarter when connected to the internet.
BEFORE YOU START
1. Dowload the App
Download the free Landroid Vision App first. Get it from Android
or Apple App stores.
2. Ensure you have:
• Your WiFi network password/Bluetooth function on your
smartphone.
• Landroid Vision Serial Number: it can be found in the label
under the rear bonnet of the machine.
If you don’t want to type the 20-digit Serial Number, input it by
scanning the QR code with your smartphone’s camera.
3. Check your settings
Wi-Fi connection
• Landroid Vision works with 2.4GHz/5GHz Wi-Fi signal.
• Make sure your Landroid Vision is in the same router environ-
ment as your smartphone.
• Make sure the distance between your Landroid Vision,
smartphone and your router is as close as possible during
connection.
Tip: When Landroid Vision moves to an area of your lawn with
poor or no Wi-Fi signal, instructions sent from the App will only
be executed when Landroid Vision returns to an area with good
signal.
Bluetooth function
• Bluetooth function on your smartphone is activated.
• Make sure your Landroid Vision is within the connectable
distance.
GET IT ON
Available on the
Label and
QR code
To Next Page
Loading...
