is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
o
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Vacuum adaptor 1pc
Non-scratch base cover 2pcs
Parallel guide 1pc
Hex key 2pcs
Blade: ø76x ø10mm (1pc 24T TCT for wood, 1pc 44T
HSS for general blade, 1pc 50grit diamond disc)
3pcs
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
To Next Page
Loading...
Need help?
General
