Wyrestorm SW-0402-MV-HDBT - 5 Display Modes; Multi-View (MV);Picture in Picture (PIP) Mode; PIP Window Order; Quad-View Mode

© Copyright 2017 WyreStorm Technologies | WyreStorm.com
SW-0402-MV-HDxx Installation Guide | 170404-1529
13 of 26
North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 230 343
Email: Support@WyreStorm.com
5. Display Modes
5.1 Multi-View (MV)/Picture in Picture (PIP) Mode
When a Multi-View mode is selected, the screen will display a main source and three other sources in smaller PIP windows. While the
layouts can be customized, there are 4 presets that correlate to the front panel and handheld remote buttons. The output to each
display is mirrored during MV mode displaying the same content on both displays.
MV-A
MV-B
MV-C
MV-D
PIP Window Order
While the graphics above show the main image as input 1, this will change based on the selected input. The main image will change
to the input number and image 1 will move to the first PIP window.
Selected Input
PIP Window Order
Input 1
Main= Input 1, PIP2= Input 2, PIP3= Input 3, PIP4=
Input 4
Input 2
Main= Input 2, PIP2= Input 1, PIP3= Input 3, PIP4=
Input 4
Input 3
Main= Input 3, PIP2= Input 1, PIP3= Input 2 PIP4=
Input 4
Input 4
Main= Input 4, PIP2= Input 1, PIP3= Input 2, PIP4=
Input 3
5.2 Quad-View Mode
When a Quad-View mode is selected, the screen will display the sources in 4 quadrants on the screen. As with Multi-View, there are 4
presets that correlate to the front panel and handheld remote buttons. The output to each display is independent during MV mode
allowing for different content on each display.
2K/4K QV
5.3 4x2 Matrix Mode
This mode allows for a single image to appear on the display from a single source.