Wyrestorm SW-0402-MV-HDBT - Selecting a Source

To Next Page

To Previous Page

SW-0402-MV-HDxx Installation Guide | 170404-1529

18 of 26

North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 230 343

Email: Support@WyreStorm.com

7.6 Selecting a Source

An input number for each output can be selected using the Matrix tab within the PC Console.

1. Open the PC Console and establish communication with the scaler.

2. Select the Matrix tab.

3. In the Matrix tab area, select the desired input under the appropriate output.

4. In the Source Select navigation bar, select a source for the input

5. .

6. Select the audio source format for each input (HDMI, Stereo or RCA).

Other manuals for Wyrestorm SW-0402-MV-HDBT