Wyrestorm SW-0402-MV-HDBT - Controlling Multi-View in the PC Console

© Copyright 2017 WyreStorm Technologies | WyreStorm.com
SW-0402-MV-HDxx Installation Guide | 170404-1529
19 of 26
North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 230 343
Email: Support@WyreStorm.com
7.7 Controlling Multi-View in the PC Console
Multi-View screens can be controlled and configured using the HD MV, HDMV Settings and PRESET tabs in the PC Console. These
tabs allows for Multi-View to be activated and adjusted for the following.
 Image to display on which view.
 Position each views on the main screen.
 Assign priority to an input.
 Resize a view.
 Select the overlay setting to use.
 Select background colors and borders
 Set multi-view audio source
 Save up to 20 custom multi-view presets
HD MV Tab Overview
Set to Multi-view
Sets the output to Multi-View.
Image to Adjust
Selects the image in the view to adjust.
Size
Adjusts the size of the view selected image.
Position
Adjusts the positon of the selected image.
Images views can also be positioned by selecting and dragging while holding the mouse button down.
Four Input
Allows each PiP source to be more accurately placed by entering X and Y coordinates.
Overlay Setting
Selects one of 12 pre-configured multi-view layouts.
Main View
Image area for the configured screens. Note that this area is smaller when a 2 column x 2 row overlay
is selected.
Image Views
Secondary image views. Note that these are the same size as the main view when a 2 column x 2 row
overlay is selected.
Priority Level
Selects the priority level for inputs when active.