Need help?Do you have a question about the X-Crafts Embraer E195 and is the answer not in the manual?
General| Wingspan | 28.72 m (94 ft 3 in) |
|---|---|
| Type | Regional Jet |
| Sim Platform | X-Plane |
| Developer | X-Crafts |
| Model | E195 |
| Cruising Speed | 0.78 Mach (828 km/h, 515 mph) |
| Passenger Capacity | 108-124 |
| Cruise Speed | 0.78 Mach (828 km/h, 515 mph) |
| Height | 10.55 m (34 ft 7 in) |
| Engines | 2 × General Electric CF34-10E turbofans |
Instructions on how to install the Embraer EJets aircraft add-on for X-Plane.
Detailed explanation of the Flight Guidance Control Panel (FGCP) functions.
Description of lateral autopilot modes like FD, AP, APP, NAV, BANK, HDG, YD, SRC.
Description of vertical autopilot modes like ATHR, VNAV, FLCH, G/S, V/S, ALT.
Operations of the DCP for navigation source, altimeter, and barometer settings.
Step-by-step guide on how to engage the autopilot system.
Overview and functions of the overhead control panel.
Description of the AC and DC electrical networks and their components.
How the fire protection system alerts and operates in case of engine fire.
Operation and functions of the Auxiliary Power Unit for ground and in-flight power.
Operation of fuel crossfeed and pump selectors.
Procedure for starting the aircraft engines.
Description of the main panel's Electronic Flight Instruments System (EFIS).
Detailed explanation of the PFD's attitude, speed, altitude, and navigation data.
Overview of the MFD's map, navigation, and system synoptic displays.
Using the MFD for map display, range selection, and navigation data.
The EICAS display for engine parameters, alerts, and system summaries.
Using the load planner to simulate passenger, cargo, and fuel loads.
Guidance on utilizing checklists for all flight phases.
Steps for activating aircraft power and initial display activation.
Detailed steps for starting the Auxiliary Power Unit.
Procedure for starting the aircraft using an external Ground Power Unit (GPU).
To Next Page
