2. After you select the right combination, press ‘ACCEPT’. A verbal and written message will notify
you to release the brakes, click on the ‘CONFIRM’ button to proceed.
3. After you release the brakes, there will be another message informing you that the pushback will
start shortly. To start the pushback click on ‘ACKNOWLEDGED’.
4. After the pushback is completed a last message will be shown notifying you that the pushback is
completed.
NOTE: Once the pushback starts you cannot abort it. It is possible to start your engines during
pushback without concern that it will upset the path your tug guides you through.
5.3 WINGLET AND GROUND SUPPORT EQUIPMENT OPTIONS
49
To Next Page
Loading...
