You can also set a custom QuickLook. îThe steps are as follows:
1. In the 3D cockpit view, set the desired view. Or even an exterior view ...
2. Now press Ctrl 1 (or any other digit from 0 to 9). The number must be on the number pad on the
keyboard.
3. Thus stored, you now can see this view by pressing the 1 (without ctrl) on the number pad.
4. Pressing the 1 again, the previous view is restored.
5. These 10 QL's you can now place on different joystick buttons. This can be done as usual in the
menu "joystick, keyboard and devices" - "Extra Buttons".
6. The saved views are aircraft specific. They are saved directly in the appropriate directory of the
Aircraft, stored as "Aircraft Name_prefs.txt".
7
To Next Page
Loading...
