Do you have a question about the Xantrex 3000 and is the answer not in the manual?
Lists telephone, fax, email, and web details for Xantrex customer support and information.
Explains the guide's objective and content scope for the XPower Inverter 3000 Plus.
Presents critical warnings for installation and operation to prevent personal injury and equipment damage.
Details precautions for explosive gases from batteries and safe handling practices to prevent fire or explosion.
Covers quality power, ease of use, and comprehensive protection features of the inverter.
Introduces the main features including remote switch, AC panel, and DC panel of the XPower Inverter 3000 Plus.
Guides users on selecting appropriate battery types, differentiating between automotive and deep-cycle batteries.
Details the inverter's continuous power, surge capability, and low standby draw.
Highlights the inverter's ease of use, compact design, remote operation, and protective features.
Identifies and describes the components and indicators on the inverter's AC panel.
Identifies and describes the terminals, ground lug, and openings on the DC panel.
Guides users through planning installation, covering codes, battery needs, charging systems, and location.
Explains how to calculate the correct size for DC input cables based on length and current.
Guides on determining the correct fuse or circuit breaker size based on battery short-circuit current ratings.
Lists the essential tools and materials required for the inverter installation process.
Provides detailed instructions and approved orientations for mounting the inverter securely.
Covers AC load connections and the crucial step of connecting the inverter's chassis ground.
Provides step-by-step instructions for attaching DC cable connectors and routing the cables.
Highlights critical cautions for DC connections, including reverse polarity, terminal tightening, and loose connections.
Explains how to turn the inverter on/off and operate multiple loads sequentially to prevent overloads.
Covers turning off the inverter when not in use and understanding the LED display screen for status monitoring.
Details the inverter's power output ratings and allowable input voltage ranges, including alarm and shutdown thresholds.
Discusses inverter loads, high surge loads, and critical warnings about appliance compatibility with the modified sine wave output.
Provides guidance on routine maintenance and best practices for recharging batteries to ensure longevity.
Addresses common issues like audio buzzing and TV interference, offering specific troubleshooting steps.
Presents a comprehensive table of error codes, problems, causes, and solutions for diagnosing inverter issues.
Lists detailed electrical performance metrics and physical dimensions/weight of the inverter.
Guides users on selecting appropriate battery types, differentiating between automotive and deep-cycle batteries.
Explains battery capacity ratings and critically emphasizes the 12V battery requirement for the inverter.
Provides a step-by-step guide for calculating the necessary battery capacity based on appliance usage and charging intervals.
Illustrates a practical calculation to determine the recommended battery bank size in Amp-hours (Ah).
Discusses using multiple batteries, parallel connections, separate banks, and cautions against mixing battery types.
Outlines charging system requirements and warns against direct alternator operation of the inverter.
Discusses using standard alternators, controllers, or high-output alternators for effective battery charging.
Details the product warranty, coverage period, and instructions for obtaining service from Xantrex.
Specifies proof of purchase requirements and lists common warranty exclusions like misuse or alterations.
Disclaims warranties and warns against using the inverter with life support or medical equipment.
Outlines the policy and steps for obtaining an RMA and returning products for service.
Explains how to obtain paid service for units outside the warranty period or conditions.
Provides a checklist for recording system details to aid customer service representatives.











